Sold converted Glock 17 was actually priced very reasonably

at the Scottsdale Gun Club for

ONLY $1250 !!!!!!!!!!!!!!


I realize that not everyone can buy these, which is why the price is so low.  The price is reasonable enough though that if you did meet the qualifications then it would be stupid NOT to have one.

This item is a Post 1986 Dealer Sample, available only to Class 3 dealers with a Law Enforcement demo letter. All NFA rules apply.

This item is a Select Fire (Semi Auto / Full Auto) Glock 17.  It uses a conversion device to allow fully automatic operation.  The host pistol is a 3rd Generation Glock 17.  On full-auto, this firearm operates at approximately 1200-1300 rounds per minute.

The conversion device was manufactured by The Armory of Scottsdale Arizona and the model number is GLK18.

That, or an actual Glock 18 is my dream gun!

Someday…  Someday…

Scottsdale Gun Club Product Page – HERE



Andy October 26, 2010 at 06:02 am

i would like to know where i could buy this pace Semi Auto / Full Auto for my glock


Lance williams November 2, 2018 at 08:46 pm

Email me I have 3 of them on hand I can send you pictures as well.


pedro.j Ramirez January 8, 2022 at 06:39 pm

i need one of them


simonriece October 31, 2010 at 05:33 am

The device seems only to mimick the function of a glock 18, by impeeding the the trigger bar catch. This is what the glock 18 does, but it does so from the confines of the slide. I can’t say for sure without better photos, but this doesn’t appear to be a permanent part of the weapon. That would make this a type of DIAS, which other than for R&D purposes, I can’t imagine any reputable SOT manufacturer making.


Jerry October 31, 2010 at 07:37 am

$1,250 is cheap? You can buy the same kit at for $180.


Charlesincharge February 15, 2011 at 07:34 pm

You can get similar kits over the counter, cash & carry, in the Phillipines for around $200.


Daniel December 4, 2016 at 06:35 am

Can you send me the website for the Philippines to get it converted kit?


Craig Anderson May 1, 2018 at 01:09 pm

What is the url for the phillipens in Information


Oliver September 5, 2020 at 03:01 am

legit sir?


Robbie March 7, 2021 at 07:17 pm

If it’s cool with you. I’d like that website too.


Bill Holmes January 13, 2011 at 01:06 pm

by getting a class three card you can have a glock 18


mark an targets December 4, 2011 at 11:58 pm

where can someone get a class three car ?


mark an targets December 4, 2011 at 11:59 pm

where can someone get a class three card ?


marc April 24, 2014 at 02:30 pm

you must apply for a federal firearms class 3 license..its a collector/curator license, so there will be stipulations of course


Vince April 11, 2011 at 04:28 am
Glock March 22, 2013 at 09:18 pm

Did u get it send to u to the USA?????


Gene Hall July 22, 2011 at 03:14 pm

Sorry, but reasonably priced??? NOT Le,SOT, ClassIII, and Military can buy these for #1. Glock 18=&500 & Glock 18C=$532….Pull that over on someone else


ENDO-Mike July 22, 2011 at 03:46 pm
why so serious? April 28, 2013 at 09:46 am

do you think this is what the Joker had on his Glock 17, or, did he have a Glock 18 to make up the difference? btw, can you even legally own a fully automatic weapon in the United States?


me May 24, 2013 at 07:03 pm

I’m not a big fan of the FA conversion kit, it does tend to cause malfunctions.. And it adds an extra step or two when field stripping. Novelty factor?.. yes very cool.. Practical..? I think not.. In FA operation the glock itself needs something to make it more manageable especially if its a stock 17/19. a real g18 is compensated.. so if I were to carry a gun in that configuration I would stipple/texture it extensively to aid in the grip and control.


casey August 3, 2014 at 02:09 pm

nah the g18 is not compensated the c varient is, thus the c in the name just like the g17c and the normal g17 are two different firearms so are the g18/g18c


Edgar Williams September 13, 2016 at 04:47 pm

How much can I buy a full auto Glock 17 for plus shipping and handling.


Daniel Vizcarrondo December 2, 2016 at 01:19 pm

I bought a conversion kit from JnC Andy send me the sear on a block of metal so I need to take it to a machine shop to take it off the blog of metal if I were to buy one from you guys is it ready to go on the gun or do I have to do the same thing?


Ricardo April 15, 2018 at 03:43 pm

Hi, I want to make my Glock 21 .45 fully automatic, where can I found the kit?


Lance williams November 2, 2018 at 08:48 pm

Email me I have 3 of them on hand I can send you pictures as well.


Lance williams November 2, 2018 at 08:49 pm

I have 3 of them on hand I can send you pictures as well.


Camacho May 14, 2018 at 12:15 pm

Hello I would like to convert my G4 19 into machine gun. Can u direct me to the right site if u do not sell the part. Thanks


Lance williams November 2, 2018 at 08:50 pm

I have 3 of them on hand I can send you pictures as well. Email me at


Lance W November 2, 2018 at 08:51 pm

I have 3 of the glock switch conversation on hand I can send you pictures as well.


Lancewin5-0 August 11, 2020 at 05:49 am

Whoa nelly! Lance has 3 kits ready to go and up for sell! The only two questions I have for you Lance is whether you glow and which alphabet agency you work for?


re-giN December 15, 2020 at 07:34 am

Based reply.


j December 30, 2018 at 09:15 pm

I have the book for this.


Cancel reply


Older post:

Newer post: