AR-15 Kaboom – Why I Don’t Reload

Cause was a binary pistol/rifle powder charge on a reload. There was no barrel obstruction:

I’ll probably reload someday because I have quite a bit of brass. Stuff like this scares me though.

  • More pics on AR15.com – HERE
  • Source of thread – HERE (you need to be a member to see the pics here though)

Funny how he can just dust that ACOG off and put it on a new rifle. No surprise there though, you get what you pay for.

The shooter is apparently OK.


Comments

24 responses to “AR-15 Kaboom – Why I Don’t Reload”

  1. I only reload straight cased ammo for handguns. It is fairly simple and if precautions are taken, rather safe.

    However if you continue having misgivings about reloading, I humbly offer my services as Foster Parent for all that brass you have accumulated :)

    1. Admin (Mike) Avatar
      Admin (Mike)

      haha brass foster parent!

      Nice work on the Colin Goddard comment on Snowflakes getting under the anti’s skin btw. I read the article and saw the facebook page before you took the article down. They were pretty pissed off about that. haha

    2. I missed the comment, Miguel and would really love to see it. Email me?

      1. Was it the Brady Clippy still on your site?

  2. Just follow the directions for the loads and it’s perfectly safe.
    I tend to go slow and weigh my powder twice with my setup.

    The danger comes from when you
    1. Don’t pay attention
    2. That ammo isn’t “hot” enough so you so you want to add a little “oomph” to it that is way beyond the max charge.

  3. Critter Avatar

    Reloading is perfectly safe IF one knows what one is doing. I’m thinking that the owner of this ex-AR was not strong in the force.

  4. Is that one of the Cavalry Arms CAV-15 MkIII polymer lowers? I wonder what the damage would have been to a standard lower. I’m sure the Cavalry Arms lowers are well build but I can’t help but wonder if, in this case, it posed more danger to the operator.

    1. Admin (Mike) Avatar
      Admin (Mike)

      Aluminum may have been less safe actually because when it exploded it would have probably fragmented more. This cav arms one seemed to just crack (except for the one part of the magwell), which was probably a blessing.

      1. SPC Fish Avatar

        i wonder if he had one of those new polymer uppers on it to try to make a super lightweight rifle. then decided to try some superhot handloads

  5. Paranoid in Montana Avatar
    Paranoid in Montana

    I enjoy reloading. I reload 7.62×51 for hunting and fun shooting. I reload .223 for hunting and fun shooting. Oh hell, I reload because it’s fun. .223 reloading is a little hard to justify. There isn’t any performance gain that I’ve seen. The steel cased stuff shoots just as well as my plinking loads and the match stuff shoot better than my best loads. It’s marginally cheaper and I hate getting rid of brass so it treats some of my mental issues. Most of my reloading is 9mm because I’ve got a 1000 round a week pistol habit and it’s the only way I can afford it. My advice, get one of the big name books. Hornady, Speer, etc. Then get the little book for any caliber you plan on reloading. That way you can read up on what they all say without having a 10 foot stack of books to look through as you are digesting all the information. The ABC’s of reloading should be required reading as well.

    1. Admin (Mike) Avatar
      Admin (Mike)

      1000 9mm rounds a week! That’s awesome.

      Yea i’ll have to do what you suggested someday.

    2. Laughingdog Avatar
      Laughingdog

      These days, I’ve found it’s also easy enough to just go to the powder manufacturer’s website and get their charge data for whatever you’re loading.

  6. +1 for Jeff and Paranoid.
    Before buying any equipment, you should buy the ABC’s Of reloading.

    http://www.amazon.com/ABCs-Reloading-Bill-Chevalier/dp/0873498518/ref=sr_1_2?ie=UTF8&qid=1302873451&sr=8-2

  7. That guy spent a LOT of money on his AR to have it go kapoot, still has his ACOG though, thats the good thing… but I don’t think that preset drop-in FCG is going to still have the same trigger pull =P

  8. Looks like a fine example of why it’s a good idea to always wear eye protection when you’re shooting.

  9. MAC21500 Avatar

    That is a slam fire not an incorrect powder mixture; if you look at the pics on AR 15.com none of the locking lugs are torn out and the breech isn’t split, nor is the barrel ruptured. Must’ve not used mil spec primers or seated them properly.

    1. SPC Fish Avatar

      good observations

    2. I think you should read up on what a slam fire is. Your 100 percent incorrect on your diagnosis. A slam fire just shoots a bullet through your barrel without a trigger pull because the free float firing pin hits a primer that wasn’t seated deep enough. It does not blow your gun apart.

  10. Critter Avatar

    I’ve seen binary loads listed for Very large rifle calbers that utilize a small charge of pistol powder to ignite a large charge of very slow burning rifle powder. What this guy was thinking putting a binary charge in something as small as .223 is beyond me.

  11. What’s “factory ammunition”?

  12. Antibubba Avatar
    Antibubba

    If it’d been an AK he never would’ve noticed.
    Good thing it wasn’t a 45 ayceepee–it would have taken off his entire right side!

    1. SPC Fish Avatar

      http://www.youtube.com/watch?v=pMXKo8fySrg

      yeah, never noticed, RIIIIGGGHHHT

  13. Butch Williams Avatar
    Butch Williams

    To much of a powder charge excessive pressure in the chamber looks like to me.

  14. If the individual actually used a “binary powder load” in 223, he does not know a thing about reloading and is headed for a Darwin Award in life. I have reloaded for four decades and never had a kaboom in tens of thousands of rounds fired. I always follow the reloading manuals and back off from maximum charges. The only duds I have had have been from bad primers (not my fault) or my fault. The only squib load (light powder charge) I have had was factory ammo which I rarely use.