$169 10mm Handgun – Hi-Point Conversion

The gun store guys converted a Hi-Point (likely a .40) to shoot 10mm:

Seems to work damn good.  Can’t really beat it for the price.

I’m sure this modification will catch on in the hood, because 10mm kills mo’ bettah!

They never mentioned if they were doing the conversions in their shop or not, but if you’re interested i’d suggest giving them a call.


Comments

63 responses to “$169 10mm Handgun – Hi-Point Conversion”

  1. El Duderino Avatar
    El Duderino

    Cool. Where’s my 9×25 Dillon conversion barrel? :)

    1. Where can I buy one?

  2. Feargal Avatar

    They seem to miss the target quite a bit ….

    1. Jackyl357 Avatar
      Jackyl357

      I am no good on steel either. So I really cant knock them.

  3. I guess they are pretty good gunsmith, but damn! they have to stop posting videos where they are shown shooting. Or edit/cut them a bit. They talk like they are gun experts and “we’ve already seen all what can be done with firearms” and stuff and can’t shoot 10 rounds in the target? Come on.

    1. TheRealDave Avatar
      TheRealDave

      Maybe they are comfortable being “pretty good gunsmiths” and not too worried about your opinions on their marksmanship.

    2. Game programmers are often lousy at games.
      Where is the clause that a gunsmith has to be an awesome shootist.
      How about a blacksmith. How many swordsmiths were world renowned warriors?

      Those who make things are not the best at using them. After all. They spend their time taking the weapon apart and playing with the internals than playing on the range.

  4. was that bullet just loaded in short? casing was long, bullet head looked very short

    1. nvm, commented before i finished watching it.

  5. overkill556x45 Avatar
    overkill556x45

    Given that Hi-Point pistols explode more frequently than Glocks, I’m not sure I would trust the metallurgy to stand up to 10mm pressures. At the top end, 10mm pushes around 5000psi more than 40S&W. Seems like a cheap, cool toy. Until you go to the ER to have your face sewn back on.

    1. Yep… exactly my thoughts. I like my hands! wanna keep ’em!

    2. If a Hi-Point can shoot a carriage bolt out of the barrel without exploding, I don’t think a 10mm will be a problem. Look on YouTube for the Hi-Point torture test. I can’t think of another pistol that would survive what they put it through.

    3. Maybe you should check out their other videos. They already did torture tests on a Hi-Point and the only way they could get it to explode would have made ANY firearm explode.

      1. Where can i buy mine ?

    4. Michael Harris Avatar
      Michael Harris

      Hi Points are waaaay overbuilt. These same guys tried to destroy one by loading some ridiculously hot loads through one. Some so hot they triggered it by wire remotely. The gun ate everything they threw at it. They only succeeded when they put a bolt in the end of the pistol and fired it. Even then the barrel just bulged if I recall correctly.

    5. 40 S&W is rated at 35,000 PSI
      10mm is rated at 37,500 PSI
      difference is 2,500 PSI
      40 S&W 180gr. bullet, 8gr. longshot powder 1159fps, 32,300 PSI
      10mm 180gr. bullet, 9.5gr. longshot powder 1287fps, 34,600 PSI the longer case lowers the pressure allowing more powder to be loaded, go with 9 grains instead of 9.5 and pressure is practically the same, not saying its safe but most factory loads do not push the limits except!! for those producing extreme hunting loads
      Underwood Ammo, Buffalo Bore, etc.
      still not saying its safe but is it more dangerous then mountain climbing? or driving fast? or eating out?

      1. Depends who you are eating out.

        1. Janeane Garofalo eew !

    6. Les Brennan Avatar
      Les Brennan

      Bullshit! Hi Point uppers are injected hi temp 3 alloy Zinc, Magnesium, and Copper, blowback upper slide. This is the simplest concept during WW ll machine guns let alone pistols. Hi Points are the safest unmilled, (why you pay out the ying yang for milled pistols).Yes they may seem ugly to some etc. Do the research on ZMC injected die cast alloy and keep an open mind to evidence based reality. Plus dont leave out the fixed barrel as opposed to floating. One must practice shooting fixed barrels. I consistently hit the bullseye at 75 yards with my UNMODIFIED C9. These pistols need broken in, take off slider and clean rails, and then go shoot the shit out of it. You can’t damage these guns and after a safe 30 year record, youd be an idiot to buy anything else. The 9mm +p+ ammo is the most deadliest in existence. Please research before talking out of the bottom end…

    7. There’s been plenty of barrel obstructions survived by hi-points on video. 10mm will never come close to those kinds of pressures. Glocks “blow up” from unsupported chambers. Hi-points don’t blow up from anything short of welding the barrel shut.

  6. just because it fits is not a good enough reason to try it. Didnt they make a video of people buying the wrong ammunition?

  7. spencer wade Avatar
    spencer wade

    I usually have 10 inches of pentration and good expansion aswell. IF YA KNOW WHAT I MEAN.

  8. The ammo they shot was worth more than the gun.

  9. DonovanM Avatar

    A Milspec Monkey fan… Why am I not surprised.

    And 10″ of penetration doesn’t meet the FBI minimum standard, LOL.

    1. TheRealDave Avatar
      TheRealDave

      I was also surprised at the getlatin results.

    2. PhilaBOR Avatar

      Does it meet the Secret Service standard?
      ;-)

  10. ‘What do you think Barry?”

    Well.. I’ll tell ya what I think.. hiPoints are shit. Always shit. And forever shit. Ghetto/Saturdaynight specials. *eye roll*

  11. I do remember seeing them trying to destroy that hipoint, it took a LOT of abuse. It went from ‘watch us blow up this cheap gun’ to ‘what can we try next other than welding the barrel closed’

  12. Ron H Avatar

    I guess there will always be gun snobs. All I know is I can generally out shoot most others at the range with my Hi Point 40. I also have a Smith & Wesson Sigma 40 and I like the Hi Point better.

    1. Bo picks Avatar
      Bo picks

      I have six guns, my 9c hipoint a little heavy but I shoot it the best. I own sw mp 40, heritage, sw sv9, sw 15-5, sw victory. Even my wife enjoys hipoint 9. It’s bigger not fancy…and it’s hard to conceal for sure but compared to the bad guns and other companies on the lower end, They rock. . Fyi the ruger lcr very hard on the hand hate them and the shields way too small

    2. Marek Burza Avatar
      Marek Burza

      I have a hipoint JHP .45 acp and it is deadly accurate. It shoots as well as any 1911 I have shot (which is 4…. one of which is a kimber).

      Hipoint is HANDS DOWN the best valued gun brand out there…. period. If you think hipoints are junk it means you have never owned or shot one.

  13. Crunkleross Avatar
    Crunkleross

    It’s not so much their marksmanship as their desire to shoot faster than their skill will allow them to hit with much regularity.

  14. i bet if that bullet didn’t catch that table it would of went into the gel further

  15. how or were can I buy the conversation for the hi point carbine to make it a 10mm or buy one already converted I need one that is California legal.

  16. has anyone that negatively commented on the hi-point actually owned and shot one? if not stfu!

    1. most likely not, those who own and shoot them understand them, its like anything else you use often you learn to use it well, pickup something new and your first impulse is generally to dislike it because its different, different makes dislike far to often, learn to understand something or somebody and dislike either fades or occasionally gets stronger, those of us who learned to like our hi-points usually shoot them more then our (insert brand name here) its understanding these facts of life that can be hard.

    2. Agreed, I own one, used to have 3, i have nothing bad to say about the Hi-Pount line, only thing I guess would be that I wouldn’t carry them, just because they’re so darn heavy, but as a nightstand weapon, its awesome

  17. I have never seen anyone with a legitimate failure of a hi-point. They couldn’t possibly sell a gun that was a danger to the shooter and stay in business for 20 years.

  18. how was the conversion done?

  19. I own a 40 HP and it is nothing but good. I also have Sig Sauer and S&W 40 and they don’t do any more than my HP, except cost 4 or 5 times more. I wish I knew enough to convert my 40 to 10mm, sweet.

  20. Come on now, A freakin’ Hipoint??!! it looked like he was holding a gun they confiscated from a “Cops” episode!! Why would you they go through all this BS to make an operational 10MM semi-auto that looks that fugly!! Where is the marketability. They should have definitely started with a frame that takes a double stack magazine. If I was the owner of this shop i would be pissed that these guys wasted time on something that would never sell.

  21. Mr. Reliford Avatar
    Mr. Reliford

    Where can I purchase a 10 mm hand gun.

  22. Erick Floyd Avatar
    Erick Floyd

    There is no need to use racial slurs guys “mo betta”. Cowards with guns are NOT needed, if you got something to say, act like a man and do it to people you face.

    1. Joshua Avatar

      lol, u must be black. Can only see through the “black” eyes that democrats gave you, where you see everything in a victim mentality and all the whites are out to get you, lol

      1. lol I was thinking the same thing, once a liberal black “victim” always a liberal black “victim”.
        Besides, there was no racial slurs used, and “mo betta” is just how “you people” talk, the scientific term is “ebonics”.

  23. To answer Jimk, what they did must have been a new and untested idea they came up with “thus the video to show and share their success at it”. If you had gunsmith skills of that caliber, would you try something that has a chance to destroy a perfectly good firearm on a expensive weapon or a cheaper one? High point is ugly but durable in a overkill kind of way while being very low cost. AIso I seriously doubt they would ever sell a weapon they converted in such a way due to the chance of getting sued if anything went wrong once in the new owners hands.It was a really neat display of their gunsmith talent, as well as something out of the ordinary that I’m sure we ALL wish we could do. Let’s not criticize the few of us who CAN do such a thing or they may stop and that would suck.

    1. Its not exactly an untested idea anymore, a number of people have done it, (very successfully I should add) and the guns function just fine, for those of you who think its to much pressure please consider this, if you take 35000 PSI (SAAMI spec on the 40 S&W) X 1.072 you get 37520 PSI (SAAMI spec for the 10MM is 37500 PSI) so you are over pressuring your 40 by 7 percent, most gun company’s pressure test their handguns to way over 7 percent, some go to 60 percent over pressure, very few ammunition company’s and very few re-loaders load up to the maximum limit so pressure really should not be a problem, if you are concerned about pressure see my earlier post about reducing the charge in the 10mm by .5 grain giving it 40 S&W pressures with higher performance, the real advantage with the 10mm is in the longer case which runs lower pressures then a short case, allowing more powder thus more speed for the same pressure, use your calculator and make it safe, safe enjoyment is the bottom line in experimenting is it not?
      and yes I do own hi-points, yes I am a re-loader, and yes my conversion gun has over 150 rounds through it and counting, and yes I started out with 28000 PSI loads, nervous? no, careful? yes.

      1. Dave, you seem to know the pressures well, what’s your option on wild cating a hi point to shoot 400 core bon. Pressures Max at 2900 much easier in a hi point for built for 35000 +p and less pressure and wear than a 10mm conversion

        1. Melon, that is another conversion I had considered then put on the back burner for later, I think it would work just fine but rechambering the 40 s&w to 400 cor bon is much more difficult because of the bottle neck design, the 10mm is straight wall like the 40 so all it requires is a .425 reamer and a little patience, pressures with the 400 cor bon should be no problem at all since as you have already noted the highest listing for the 400 is 29000 psi and the 40 s&w is rated at 35000 psi.

  24. Doug Cook Avatar
    Doug Cook

    Can you get the 22 lr wmr ammo?

  25. Dave if you ever descide to try the conversion or know someone who can do the barrel let me know. Id be interested

    1. I did the conversion to 400 cor-bon and learned a few things along the way, you need to start with a 45 acp then get a 40 S&W barrel for on it, I started with a 40 S&W so I had to grind the extractor down and ream the bolt face bigger so the larger brass fits, although I didn’t figure this out until after I had the barrel reamed, I also have a slightly sharper shoulder but the reloading die takes care of that, it might work the brass a little more but I’m reloading some for the fourth time and no sign of cracks yet, the lower pressures might be helping that too, to cold to get the chronograph out and I’m still loading a little on the light side anyway, but it looks like it will work okay, 50 rounds through so far, I don’t know if its better then anything else but it is different, (that’s reason enough is it not???)

  26. Mr. Mike Avatar

    I did the conversion back in June, 2016. I’ve fired some pretty warm loads through the thing – and even had one jam the bullet into the brass during the feed cycle, resulting in a smeared, backed-out primer that was punctured. The old Hi Point brick is just fine ! I even went over to the ghost ring sight – and LOVE how this thing works. I also used the recoil spring from the JHP 45, which has kept the bolt in battery a bit longer as well as reducing the beating on the frame. It was a good decision. I have a 69 dollar 10mm pistol…. and it is a FINE old weapon….

    Smile !

    1. I’ve been staring at your post for a while thinking I’m missing something, quote (I also used the recoil spring from the JHP 45, which has kept the bolt in battery a bit longer as well as reducing the beating on the frame.) you removed the 40 s&w spring that was meant for 35,000 psi and replaced it with a 45 acp spring meant for 23,000 psi?? putting a weaker spring in holds the slide in place longer and reduces the amount of power the slide hits the frame with?? I don’t quite follow the line of logic there, Confused.

      1. Force=mass*acceleration. The pressure itself isn’t what determines the spring strength, but the force of the recoil. Roughly ~230gr*900fps=207,000 for 45acp, & 180*1050fps=189,000 for 40cal. So, the 45 would typically have more recoil, and likely have a stronger spring. (This is very general; don’t quote me)

  27. Why 40 call with the right amount is pretty damn close to 10 mill why ruin any reliable gun.vfor such a small exchange. If you want a reliable 10 mill buy one!!

  28. Sorry last post Auto correct sucks 40 call with proper ammo not much difference. 10 mill overrated. You want more power look at 44 Magnum or more. When I see 10 mm most powerful handgun I have to laugh. Sorry but Not never going to beat 44 Magnum , 454 or .50

  29. Randolph J PEREZ Avatar
    Randolph J PEREZ

    I want one how do I order one ? Contact me back thanks guys love your channel..Amen !

  30. do any of you guys have a 10 mm for sale I would love to have one also you can email me [email protected] or text me 615-636-6163. Prefer text as I check them more often thanks guys

  31. Retired Conservative Avatar
    Retired Conservative

    I have a Hi Point C 9 that I bought used. It is kind of ugly compared to more expensive guns. It is heavy. It is hard to take apart and reassemble because of the rear pin that has to be driven out and driven back in place. Some parts will drop or shoot out when doing maintenance and cleaning if you are not cautious. Lining up the hole in the rear stop to insert the pin during reassembly is a real pain. On the plus side: It is accurate with adequate practice. It never jams. it is durable, takes a licking and keeps on ticking. It has a lifetime unlimited warranty. It is heavy enough to beat and render an attacker harmless if you run out of ammo. The price is super low. Yes there are tradeoffs, but there are pluses too. I may buy another one in 45 acp.

  32. It take no effort to make a 40 Highpoint shoot 10mm

    1. Yeah auto correction got me on last post, but the way high points are designed mine shoots 10mm and 40 s&w all day couple hundred rounds no malfunctions runs better and more accurate then my glock 41 10mm conversion from kkm all I did was remove the plastic magazine guide and 10mm rounds fit in the jcp magazine nothing insane has to be done.. just no reason to wanna shoot 10mm when 40 s&w is an option already, might as well go for 500 s&w magnum if you want a hand cannon thing is a concussion device for anyone without hearing protecting only thing it’s good for is maybe watching other ppl shoot your 5$ bullet ammo

  33. I bought a hi point c9 just because it was cheap and I wanted to see what the hate was all about.
    Took it to the range
    Ran 100 rounds of 9mm through it flawlessly
    Went home polished the feed ramp
    Bought three 10 round mags and a set of wood grain grips.
    Through it in my go bag and never looked back.
    It is as accurate as my high end full size sig and more acutely than my .40 shield EDC
    I would trust it with my life.