Massive And Ugly Bullpup Remington 870 Conversion Kit

Better than nothing if you want a bullpup shotgun I suppose:

Terrible looking design though… Yeeeeeeeeeeeechhhhhhhh.  I’m always surprised when designs are shitty, like it costs any less to make a mold for something that looks like a dogs breakfast from the 1980s.

Regardless of how shitty it looks, I’m sure they will sell a lot of them at the $360 asking price.  It has AR-15 features on it, so that’s an insta-cop for pretty much everyone under the age of 40.

3:50 – OHHHHH yeeeeeeahhhhh the drop test.

5:12 – It sounds like she’s shaking rocks around in an ice cream pail, inside a cave when she cycles it. Probably echoing inside that monolithic plastic housing LOL.


I love how shes talking about how it’s “feeding reliable” etc… Like do you not remember that you just wrapped $360 dollars in plastic around a normal 870?  Why are you surprised it feeds any different?  I’d take this over the KSG any day, even though the KSG looks cooler.

I wonder if the trigger feels as bad as I think it probably does.

Thoughts?  Would operate with?



Shooter McGavin October 19, 2013 at 01:23 am

Looks like it cycles reliably.

SittingDown October 19, 2013 at 05:24 am

“Great gun”

How do you know? :D

John T October 19, 2013 at 06:55 am

Looks like it cycles smoother than the Kel-tec, Ha Ha !

Hank October 19, 2013 at 07:21 am

Expect it to appear in the next sci-fi movie, like those ridiculous under barrel revolvers.

Oh, and as to the KSG: Remington 870, still just 5 shots, Kel-Tec 15…game.over.

busdriver October 19, 2013 at 01:10 pm

Kel-Tec is more like 4 1/2 shell capacity when accounting for misfeeds and operator tolerance for burning holes into their forearm

ENDO-Mike October 19, 2013 at 01:29 pm

ROFL… Comment of the day.

Luke December 12, 2013 at 06:55 pm

With an 18inch barrel you can get 7+1 on this. Even more if you were so inclined. As for the KSG you’d be lucky to unload both tubes without a failure to feed/fire at least once. All the while this setup is the same price if not cheaper. Both the KSG and the “POS”-15 are more useful as bludgeoning weapons when it comes to home defense…

Capt. Glenn October 19, 2013 at 08:36 am

Oh BTW, when you want to change the oil to your car you are going to have take the engine out and take the tires off too. I suppose if you want a shotgun that is nearly the size of, and looks like a LAW.

mattv2099 October 19, 2013 at 08:38 am

Agree with mike on this one!
Needs more abrasive, bumpy nubs n shit and a 12″ magazine extension.

Cory October 20, 2013 at 12:25 pm

Bumpy nubs? For pleasure?

Mason Noveske October 19, 2013 at 10:31 am

I wonder if it would work with the 870 mariner. stainless with a full length tube ftw!

RISC_Taker October 19, 2013 at 10:50 am

Ahhh that witty Henry Ford… Why no Endo “Any gun they want, as long as it’s black” shirt?

Rob October 19, 2013 at 11:09 am

And the Pointless and Wasted Money Award goes to this piece of shit.

Leo January 18, 2016 at 08:37 am

I’ve owned this set up for a couple years. It is by far my favorite gun in my modest arsenal. The couple extra ounces do a lot for balance and reducing felt recoil and muzzle rise. Fitted with a Burris fast fire III even my wife can knock out clay faster than some of the old guys who are using full length bird barrels.

The ugly grows on ya. It’s a great chassis.
I’ve been a fan of bullpups for some time

jim bob October 19, 2013 at 01:54 pm

she needs to demo this thing in yoga pants.

Matt in FL October 19, 2013 at 02:17 pm

She looks good in jeans, but yoga pants > all.

Matt in FL October 19, 2013 at 02:21 pm

Apparently they didn’t want to pay Tiffany scale, because they didn’t let her speak.

Rob October 19, 2013 at 03:50 pm

This actually works pretty well and make the 870 much more usable indoors. The pump and trigger are negatively affected but not so badly that it becomes difficult to use and I have found this can be fired as quickly as a stock 870. Shooting clays is a challenge but fun! Why care about how the weapon looks when it is designed as a tool, for a specific function, and works perfectly?

032125 October 19, 2013 at 05:46 pm

Rule #1 in Endotrollia: Troll.

If it looks good but doesn’t work well, troll the performance. If it works, but is ugly, troll the looks. If it looks good and works fine, ad hominem.

ENDO-Mike October 19, 2013 at 08:10 pm

haha so true.

Regulus October 19, 2013 at 05:17 pm

i wish she would of hung her ass off that blue crane and took a big shit so i could see it spatter on the ground

ENDO-Mike October 19, 2013 at 06:18 pm

LOL wtf. That’s a niche request if I’ve ever heard one.

M October 19, 2013 at 08:09 pm

You never recovered from “Two Girls, One Cup” I see…

000BK October 20, 2013 at 10:57 am

Waiter? There’s a 4chan in my ENDO.

BruisedAnus April 15, 2016 at 07:15 pm

I’d love to be at the bottom waiting with my wide mouth open as her warm delicious clumps of feces fall from the heavens…..

Aaron Baldwin October 19, 2013 at 08:32 pm

Anyone else think it looks a lot like the shotgun from HALO?

bandroidx October 20, 2013 at 07:41 am
SittingDown October 20, 2013 at 08:14 am

If you build it they will come. LOL

Oleg Volk October 21, 2013 at 07:31 am

I own one and it works very well. It’s more comfortable to shoot than a conventionally stocked 870 in terms of felt recoil, and is a lot shorter. It can be controlled with one hand if necessary. The only downside is the rear placement of the bolt release.

Dizzy October 28, 2013 at 10:58 am

4:19 yeah girl work that pump.

ryan January 6, 2015 at 05:28 pm

Endo mike, doesn’t know anything about guns, after almost 2 years on the market the Bullpup keeps getting bigger, think glock of the bullpup shotgun world, ksg and uts both very unreliable and if you sand a little on the port on the bullpup shell they extract perfect unlike msg and it’s where there just unreliable and is very expensive to fix there problems I had a KSG I won’t touch a UTS top vent holes let in dirt easily gets jammed not worth it, Im more of a rifle guy and semiauto shotty guy but the bullpup pump works perfect if you know your way around a gun and only bullpup is not very Mich bigger then a ksg but smaller then a uts

I’m still waiting for a bullpup semi auto shotgun, hard with the recoil tube in the stock but could be done

al February 24, 2015 at 01:11 pm

I have a semi auto shotgun with an extended mag made by high standard model 10b…

mike April 5, 2016 at 08:11 am

Why in the FU$% would you want to convert your shotgun to a bullpup? What is next convert your Rottweiler into a Poodle kit or I know convert your cock into a vag kit? Bruce? buy a fucking Bullpup if you want one dummy. It is about like the douchelords who put Ferrari kits on trucks or some gay shit like that and the pic of the ho I’m cool I shoot guns at target I have a gun I’m cool . No ho ur fat ur ugly and ur gun is gay u will be killed by some gangster with a duct taped 40 cal that’s has been passed around the hood for 8 years

BruisedAnus April 15, 2016 at 07:17 pm

You’re so angry… I needy out inside my anus while I furiously stroke my filthy little penis.

Rem870 October 3, 2016 at 02:50 pm

I spent some of time testing this upgrade kit. Installation takes about 30 minutes. Make sure you remove a rail from top of the receiver (if you have it) and replace oversized safety with factory one. Or you will have to start the process from the beginning wasting your time. Don’t make the same mistakes I did :)

Bullpup kit makes shotgun very compact and this is the main advantage of this product. But action becomes not as smooth as on the standard 870. And this kit is extremely expensive.

Older post:

Newer post: